Sequentially numbering multiple copies of single document using a macro


Sequentially numbering multiple copies of single document using a macro

Article contributed by Doug Robbins

Create a bookmark named “SerialNumber” in the document where you want the Serial Number to appear. It can be in the header or footer if that is where you want the number. Then create a macro containing the following commands to print the document.

It will ask for the number of copies that you want to make and sequentially number each copy.The first time this macro runs, the first copy will be numbered 1 and when it finishes running, it will store in aSettings.Txt file the number that is one more that the number on the last copy.The next time the macro is run, it will start numbering the copies from that number. If when you first start, you want the numbers to start at some number other than 1, run the macro, entering 1 as the number of copies and then open Settings.Txt file and replace the number in the file with the number that you want as the first in the series.At any time thereafter, if you want the series to start at a particular number, you can open that file and replace the number in it with the number that you want to be the first in the series.

Dim Message As String, Title As String, Default As String, NumCopies As Long
Dim Rng1 As Range

' Set prompt.
Message = "Enter the number of copies that you want to print"
' Set title.
Title = "Print"
' Set default.
Default = "1"

' Display message, title, and default value.
NumCopies = Val(InputBox(Message, Title, Default))
SerialNumber = System.PrivateProfileString("C:\Settings.Txt", _
"MacroSettings", "SerialNumber")

If SerialNumber = "" Then
    SerialNumber = 1
End If

Set Rng1 = ActiveDocument.Bookmarks("SerialNumber").Range
Counter = 0

While Counter < NumCopies
    Rng1.Delete
    Rng1.Text = SerialNumber
    ActiveDocument.PrintOut
    SerialNumber = SerialNumber + 1
    Counter = Counter + 1
Wend

'Save the next number back to the Settings.txt file ready for the next use.
System.PrivateProfileString("C:\Settings.txt", "MacroSettings", _
        "SerialNumber") = SerialNumber

'Recreate the bookmark ready for the next use.
With ActiveDocument.Bookmarks
    .Add Name:="SerialNumber", Range:=Rng1
End With

ActiveDocument.Save

If you want the Serial Number to appear in a particular format, e.g. 001, 002, etc, replace the line

Rng1.Text = SerialNumber

with

Rng1.Text = Format(SerialNumber, "00#")